Depending on the operating system you are using, a security protection message appears.

Allow the contents to be displayed.

2.Navigating the Menu and text input method
Navigating the Menu
・Item selection or moving the cursor among the menu items
select an item with ↑ or ↓
Proceed to the next hierarchy with (OK) or →
Return to the previous hierarchy with (BACK) or ←
・Setting confirmation
Press (OK).
However, when (Apply) appears on the display, Select (Apply), and then press (OK)

Text Input method
Changing entry mode, please ↓ to select (Entry Mode), and then press (OK). You can also press (Tone) to change the entry mode.
Entering text, symbols, and numbers.
Enter with the numeric keys or (sysmbols).
For detail on the switchable mode or the available text, see the next page.

Moving the cursor (Entering a space)
Move with ← or →。
Move the cursor to the end of the text and press → to enter a space.
Deleting characters
Delete with (C) pressing and holding (C) key deletes all characters.

3. Connecting the power cord and turning ON the power
Do not connect the USB cable at this time. Connect it when installing software.

4. Specifying the initial settings
Follow the instructions on the screen, set the language and time.
For detail on navigating the menu and how to input the numbers, see 2 "Navigating the Menu and text input method"

5. Setting the paper size and type
See 6 "Specifying initial FAX settings and connecting a telephone cable"

6. Specifying initial FAX settings and connecting a telephone cable
6-1 Specifying the initial FAX settings.
Follow the "Fax Setup Guide" to specify the fax number, a unit name, and a receive mode.
For more details on the receive mode, see the e-Manual.
6-2 Connect a telephone cable.
When (Connect phone line) appears on the display, connect the telephone cable by referring to the illustration.
When installing the operational handset
For more details, see the supplied manual with the handset.
6-3 Ext the Fax setup guide, and then restart the machine.
Turn OFF the machine and wait for at least 10 seconds before turning it ON again.
The telephone line types are not detected automatically. See the e-Manual and set a telephone line manually.

7. Network Connection and Configuration
About the LAN cable
Use a category 5 or higher twisted pair cable for the LAN
The machine sets the IP address automatically. Wait approximately two minutes.
About obtaining the IP address automatically.
(DHCP) or (Auto IP) is enabled in the default setting. Even if you do not set the IP address manually, this machine can obtain it automatically.
・The IP address can be automatically assigned with or without a DHCP server.
・The (DHCP) setting is prioritized over (Auto IP).
If a fixed IP address is set as the IP address of the computer, set the fixed IP address also for this machine manually.

8. Installing the driver/software
A. Install the driver and software using the user software CD-ROM.
B. For details on the installation procedure, see the driver installation Guide.

9. Perform Useful tasks
Copy
Enlarged/Reduced Copies
You can enlarge or reduce standard size documents to copy on standard size paper or specify the copy ratio in percentage.
2-sided copying
You can copy 1-sided documents on both sides of paper.
Collating
You can sort copies into sets arranged in page order.
Reduced layout
You can reduce multiple documents to copy them onto one sheet.
Copying ID card
You can make a copy of a 2-sided card onto one side of paper.

Print
Enlarged/Reduced Printing
2-sided printing
reduced layout
You can reduce multiple documents to print them onto one sheet.